Fiber Optic Terminations

FIBER OPTIC SPLICING AND OTDR TESTING

We do all types of Fiber optic Terminations and OTDR testing. Whether multi-mode fiber or single mode, outdoor or indoor, we have experience with a number of sites all across the GTA.

Fiber terminations

Contact us for complete Fiber optic installation and termination solutions. We install, maintain and test Fibre Optic Cable telecommunication cables across networks. We ensure that all work is completed in a safe environment within a timely and professional manner.

  • Fiber Splicing and Termination
  • Supply and Installation of Fiber Optic Cables
  • Cat 5/6/6A Cable installation
  • Capture the results; analyze and identify issues
  • Fluke testing for copper and fiber installations
  • Testing & commissioning of Fibre Optic Cable
  • OTDR Testing

FIBER CABLING PROCESS

We are your number one destination for highly experienced Fiber Cabling installers in the Toronto area. We help you in all stages of Fiber Cabling deployment right from estimating the type of Fiber required to design and finally maintenance.

Fiber System Design

Before you go with a Fiber installation, you need to establish with the end user or network owner where the network will be built and what communications signals it will carry. This is the phase Network Design and is very critical as rest of Cabling design and installation depends. We verify and help you identify the types of equipment required for the communications systems, the speed of the network and the distances to be covered before considering anything related to the cable plant. This process helps us determine if fiber is necessary or preferable and what type of fiber is required.

Choosing Transmission Equipment

The next process is choosing the right transmission equipment. This includes choosing the correct fiber media and related components. We help you choose the type of media such as Multimode or Single mode or even if Copper is required. Designing long distance or outside plant applications would require singlemode (SM) fiber cabling while all other premises networks generally operate over multimode fiber. Multimode systems are less expensive than singlemode systems because the large core of multimode fiber allows the use of cheaper LED or VCSEL sources in transmitters, making the electronics much cheaper. Splicing and termination are the final category of components to be chosen.

Planning for the Fiber install

Final planning for the installation is a critical phase of any project as it involves coordinating activities of many people and companies.

Ready for your Fiber Cabling Quote?

Cablify is a team of experienced and certified Network  Fiber optic installers and Commercial Electricians. We provide free onsite estimates.